How to Use a Vape Pen

Filling Your Vape Pen

  1. Remove clearomizer on the battery.
  2. You need to unscrew on the tip or the (top-fill)
  3. Unscrew atomizer or (base fill)
  4. You have to squeeze your e-fluid down to the side avoiding the air flow channel
  5. Replace the atomizer
  6. Allow 2 or more minutes for your fluid to wick prior of utilizing.

Reviving YOUR NJOY VAPE PEN

It’s much the same as charging your telephone. You’ll know it’s a great opportunity to charge if LED light of your NJOY Vape Pens flashes 10 in times. This is what you will do:

  1. Unscrew battery from tank.
  2. Connect the battery onto the charger.
  3. Try to be tolerant… the pointer light on your battery will stay on until the point that the battery is charged and prepared to use it!

OTHER RECOMMENDATIONS

We propose utilizing distinctive tanks for various e-fluid flavors and disposing of any tank after around 2 weeks relying upon your use. This is the most ideal approach to guarantee culminate flavor and vapor without fail. More explained in this post: http://www.marisazanotti.com/how-to-stay-smoke-free-a-list-of-useful-tips-for-you/

If vapor volume will diminishes, it may be an ideal opportunity to change your tank. Furthermore, do whatever it takes not to use your tank over 2 weeks. On the off chance that the tank runs dry then it could wear out.

Never utilize a NJOY vape pen without its tank. The best vape pens aren’t waterproof so keep them dry!

Filling Your Mod Tank

  1. Remove the tank from your gadget.
  2. Unscrew the base get together.
  3. Squeeze the e-fluid into the tank staying away from the air flow channel.
  4. Replace the base get together.
  5. Allow 2-5 minutes for the fluid to wick before using.

Utilizing Your Vape Pen

  1. Attach the clearomizer to your battery.
  2. Click the gem catch 5 times to turn it on.
  3. Hold down the gem catch and vape away!
  4. When not being used, it is best that you kill your battery by squeezing the gem catch 5 times.

VAPING WITH NJOY

Vaping with NJOY is a considerable measure less demanding than you may might suspect! We composed a framework that is so straightforward and helpful yet sufficiently capable that this will fulfill each grown-up from your vape-inquisitive to its vaping epicurean. All you require is: 1 top-fill tank, 1 Vape Pen, 1 USB charger, then 1 divider charger. Obviously, you’ll also require NJOY e-fluid.

STEP 1

Unscrew the tank from the battery and the mouthpiece from the tank; a few turns is sufficient. Ensure that the battery is completely separated from the tank.

STEP 2

You’re prepared to fill the tank! On the off chance that you’ve at any point presented yourself with a drink you definitely know how to pour NJOY e-fluid. Deliberately point the tip of the e-fluid jug toward the mass of the tank. As you pour make certain no fluid gets into the middle tube.

STEP 3

Once your flavor tank is full, delicately screw the mouthpiece once more into the tank and the tank back onto the battery. Make certain it’s tightened up!

STEP 4

That is it! Your NJOY vape pen is ready to go! To put your vape pen on standby, rapidly press the catch five times. The light will streak three times to demonstrate the pen has exchanged states. Your Vape pen is presently dormant.